Print

Kyocera Printer using IB-2X NIC reset

Posted in Printers

  1. Turn off, unplug.
  2. Remove the IB-2X card. Which will be secured with two thumb screws.
  3. Locate the jumper. Remove it, rotate 90%, and install on SW2.
  4. Reinstall IB-2X card.
  5. Plug the power back in and power up, wait for READY.
  6. Once printer is ready, Turn off, unplug.
  7. Remove the card again.
  8. Remove jumper, rotate 90%, which will return the pin to the original position.
  9. Reinstall IB-2X card.
  10. Plug in and power up, wait for READY.

The admin password will now be blank, DHCP is set to ON by default.